Huawei IPC6221-VRZ-SP, Руководство по настройке

Страница: 23 / 126

Parameter Description
To Enable the Keep-
Alive Function of
ONVIF Media Streams Select Enable in the Media stream keep-alive switch area.
With the keep-alive function enabled for ONVIF media streams,
the IPC stops sending media streams if it does not receive keep-
alive packets sent by the video surveillance platform within a
specified period (60s by default).
If the video surveillance platform supports the keep-alive
function, you are advised to select
Enable .
----End
3.2.4 Setting Parameters for a GENETEC-based Connection
When the GENETEC protocol is used when connecting IPCs to the platform, you need to set
the GENETEC parameters.
Context
NOTE
The GENETEC has security vulnerabilities. Using the GENETEC protocol will increase the risk of
unauthorized access and information disclosure.
l It is recommended that you use more secure access protocols, such as ONVIF or HWSDK.
l If the GENETEC protocol is used for access, it is recommended that the IP filtering function be used to
conduct whitelist authentication on the IP address of the access party, reducing the risk of being attacked.
l If the GENETEC protocol is used when you set connection parameters on the platform, the corresponding
port number is
8081 .
Procedure
Step 1
Choose Settings > System Configuration > Platform Connection Parameters .
The page for setting platform connection parameters is displayed.
Step 2 Set parameters. For detailed parameter description, see Table 3-5 .
Figure 3-5 GENETEC parameters
IPC6221-VRZ-SP
Configuration Guide
3 Setting Basic Parameters
Issue 02 (2016-04-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17