IPC1801-Z36&2802-Z18&5802-Z20
User Guide
7 Alarm Configuration
Issue 12 (2014-06-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
61
Table 7-3
SMTP parameters
Parameter
Description
Setting
Enable SMTP
N/A
[Setting method]
Select the check box.
SMTP Server
Address
IP address of the SMTP
server.
[Setting method]
Enter a value manually.
SMTP Server
Port
Port number of the SMTP
server.
[Setting method]
Enter a value manually.
[Default value]
25
User Name
User name of the mailbox for
sending emails.
[Setting method]
Enter a value manually.
Password
Password of the mailbox for
sending emails.
[Setting method]
Enter a value manually.
Sender E-mail
Address
Mailbox for sending emails.
[Setting method]
Enter a value manually.
Recipient_E-
mail_Address1
(Mandatory) Email address of
recipient 1.
[Setting method]
Enter a value manually.
Recipient_E-
mail_Address2
(Optional) Email address of
recipient 2.
Recipient_E-
mail_Address3
(Optional) Email address of
recipient 3.
Recipient_E-
mail_Address4
(Optional) Email address of
recipient 4.
Recipient_E-
mail_Address5
(Optional) Email address of
recipient 5.
Attachment
Image Quality
A higher-quality image means
more storage space. Set this
parameter based on the site
requirement.
N/A
Transport
Mode
Email encryption mode. Set
this parameter based on the
encryption modes supported
by the SMTP server.
[Setting method]
Select a value from the drop-down list
box.
[Default value]
No Encrypted
Step 3
Click
OK
.
