Huawei IN200 Скачать руководство пользователя страница 36

Страница: 36 / 142

Procedure

Before uninstallation, all applications that use the RoCE must be stopped. Otherwise, the
driver will be occupied and the uninstallation will fail.

Step 1

For details, see

7.1 Logging In to the Real-Time Server Desktop

Step 2

Go to the installation directory of the driver.

Step 3

Uninstall the driver.

On the CentOS, SUSE, EulerOS, or RHEL, run the

rpm -e hiroce

command to uninstall

the driver.

NOTE

You can run the

rpm -qa | grep hiroce

command to query the name of the driver software package.

On the Ubuntu or Debian, run the

dpkg -r hiroce

command to uninstall the driver.

NOTE

You can run the

dpkg -l | grep hiroce

command to query the name of the driver software package.

Step 4

(Optional) Uninstall the OFED driver.

On the OS supported by Huawei in-house OFED, run the

bash uninstall.sh

command to

uninstall the OFED driver.

On the OS supported by non-Huawei OFED, run the

rpm -e X

dpkg -r

command to

uninstall the OFED driver.

Step 5

Make the uninstallation operation take effect.

You can select either of the following methods:

Method 1
Run the

reboot

command on the OS.

Method 2

Check that RoCE services of the IN200 have been stopped.

Run the

rmmod hinic

command on the OS.

----End

2.4 Upgrading the IN200 Firmware

Prerequisites

The IN200 driver has been installed.

The firmware upgrade package of the IN200 driver has been downloaded.
The firmware upgrade package is included in the IN200 software package. For details
about how to obtain the IN200 package, see

2.1 Obtaining Software Packages

Huawei IN200 NIC
User Guide

2 Installation and Maintenance

Issue 06 (2019-07-27)

Содержание IN200















































































































































Результаты поиска

Содержание IN200

Отзывы:

Похожие инструкции для IN200

Бренды по названию

Популярные бренды

Huawei IN200, Руководство пользователя

Результаты поиска

Содержание IN200

Отзывы:

Похожие инструкции для IN200

Бренды по названию

Популярные бренды