User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-16
The parameter
ip
is the IP address of the console.
Example:
Configure the IAD to send the on-hook signals to the IP console,
of which the IP address is 192.20.129.2.
IAD2000(config)#
console 192.20.129.2
IAD2000(config)#
7.3
Operator Management
Operators here refer to those people who maintain and operate
on the IAD108 through the command line terminal. It accepts user
login only through the matching of user name and password. In
addition, by dividing the authorities of operators into several levels,
IAD108 can control the operators for specific maintenance to the
equipment. IAD108 is strict to the identification check of operators.
Table 7-7
Task list for managing operators
Serial No.
Operation
Command
1
Add/delete an operator
IAD2000(config)# (
no
)
user name
2
Set operator authority
IAD2000(config)#
user level
3
Change operator password IAD2000(config)#
user password
4
Set reenter number for the
operator
IAD2000(config)#
user reenter
5
Set operator's Appendix
information
IAD2000(config)#
user apdinfo
