Huawei G5500 Скачать руководство пользователя страница 130

Страница: 130 / 215

6.1 Precautions

If multiple components are to be installed, read the installation procedure of each component
before the installation.

CAUTION

Wait until overheating devices have cooled down before touching them to avoid injury.

NOTICE

Properly ground the server before installation to avoid damage to electronic components from
electrostatic discharge.

For details about product specifications, see the server white paper.

To check server compatibility, use the

Server Compatibility Checker

6.2 G560 Optional Part Installation

6.2.1 Hard Disk

Installing a SAS/SATA hard disk

The G560 supports a maximum of two 2.5-inch SAS/SATA hard disks and six 2.5-inch
NVMe SSDs.

NOTE

You do not need to power off the G560 before installing a hard disk.

Step 1

Determine the location for installing the hard disk.

Figure 6-1

shows the locations of SAS/

SATA hard disks and NVMe SSDs.

FusionServer G5500 Server
User Guide

6 Optional Part Installation

Issue 02 (2017-12-15)

Huawei Proprietary and Confidential

122

Содержание G5500
























































































































































































































Результаты поиска

Содержание G5500

Отзывы:

Бренды по названию

Популярные бренды

Huawei G5500, Руководство пользователя

Результаты поиска

Содержание G5500

Отзывы:

Бренды по названию

Популярные бренды