NOTE
MAC information of two network ports can be displayed on the PXE screen. PXE setting is not
supported. The PXE function is enabled for the two network ports by default.
----End
4.3.7.4 Setting the BIOS Password
For security purposes, change the administrator password upon the first login.
NOTE
l
The password complexity check function is enabled by default.
l
You are advised to use a password that meets complexity requirements or to enable the password
complexity check function.
l
For security purposes, change the administrator password periodically.
Procedure
Step 1
On the BIOS main screen, choose
Security
.
The
Security
screen is displayed.
Step 2
Select
Manage Supervisor Password
and press
Enter
.
The
Manage Supervisor Password
screen is displayed.
Step 3
Change the BIOS password.
NOTE
l
The current password of the system administrator is required before you change the password. The
system will be locked if an incorrect password is entered three consecutive times. You can unlock
the system by restarting it.
l
The default BIOS password is
Admin@9000
.
l
The requirements for setting the administrator password are as follows:
–
The password must be a string of 8 to 16 characters and contain special characters (including
spaces) and at least two types of uppercase letters, lowercase letters, and digits.
–
The previous five passwords cannot be reused as a new password.
–
After the administrator password is set, the
Delete Supervisor Password
parameter is
displayed, which can be used to clear the administrator password.
–
If
Simple Password
is set to
Enabled
, the system does not verify the password complexity,
but the password length must be 8 to 16 digits.
----End
4.3.7.5 Selecting a Language
Procedure
Step 1
On the BIOS main screen, choose
Main
.
The
Main
screen is displayed.
Step 2
Select
Language
and press
Enter
.
The
Language
screen is displayed.
FusionServer Pro CH121 V5 Compute Node
User Guide
4 Installation and Configuration
Issue 06 (2019-08-10)
Copyright © Huawei Technologies Co., Ltd.
90