Port
Type
Quantity
Description
Serial port
RJ45
1
Default operating system
serial port used for debugging.
You can also set it as the iBMC
serial port by using the iBMC
command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
VGA port
DB15
1
Used to connect a display
terminal, such as a monitor or
KVM.
USB 3.0 port
USB 3.0
2
Used to connect to a USB
device.
NOTICE
Before connecting an external
USB device, check that the USB
device functions properly;
otherwise, it may adversely
impact the server.
PSU socket
-
2
Used to connect to a power
distribution unit (PDU)
through a power cable. You
can select the PSUs as
required.
NOTE
● When determining the PSUs,
ensure that the rated power
of the PSUs is greater than
that of the server.
● If only one PSU is used, Work
Mode cannot be set to
Active/Standby on the Power
page of the iBMC WebUI.
5.3 Processor
●
The server supports two or four processors.
●
If two processors are required, install them in sockets CPU1 and CPU2.
●
Processors of the same model must be used in a server.
●
Contact your local Huawei sales representative or see "Search Parts" in the
Computing Product Compatibility Checker
to determine the components to
be used.
Huawei FusionServer Pro 2488H V6 Server
Technical White Paper
5 Hardware Description
Issue 03 (2021-02-01)
Copyright © Huawei Technologies Co., Ltd.
22