background image

NO TICE

Before login, ensure that the following settings meet the requirements:

A domain controller exists on the network, and a user domain and Lightweight
Directory Access Protocol (LDAP) users have been created on the domain
controller.

On the iBMC WebUI, the LDAP function has been enabled, and a user domain and
LDAP users have been created. For details, see the 

LDAP

 page.

For details about how to create a domain controller, a user domain, and LDAP users, see
domain controller documents. The iBMC provides only the access function for LDAP
users.

a.

Select the language to be used.

b.

Enter the LDAP user name and password.

n

If an LDAP user name is entered in 

User Name

Domain

 can be 

Automatic matching

or a specified domain.

n

If 

LDAP user name@Domain name

 is entered, 

Domain

 must be 

Automatic matching

.

n

In versions earlier than iBMC V294, the maximum password length for an LDAP user is
20 characters. In iBMC V294 and later versions, the maximum password length for an
LDAP user is 255 characters.

c.

Select the LDAP user domain from the 

Domain

 drop-down list.

n

Configured domain server: Select a domain server to log in as an LDAP user. The iBMC
locates the user from the domain server.

n

Automatic matching

: If this option is selected, the iBMC searches for the user from the

local user list first. If no match is found, the iBMC searches from the domain servers in
the sequence displayed in the 

Domain

 drop-down list.

d.

Click 

Log In

.

After the login is successful, the 

Information

 page is displayed. The user name is

displayed in the upper right corner.

----End

9.3 Logging In to the Desktop of a Server

9.3.1 Using the Remote Virtual Console

9.3.1.1 iBMC

Scenarios

Log in to the desktop of a server using the iBMC Remote Virtual Console.

FusionServer Pro 2288H V5 Server
User Guide

9 Common Operations

Issue 08 (2019-10-30)

Copyright © Huawei Technologies Co., Ltd.

121

Содержание FusionServer Pro 2288H V5


















































































































































































Отзывы: