l
If yes, contact Huawei technical support.
l
If no, replace the cable or insert the connector securely, and go to
Step 7
Bind the new optical cable.
Bind the new optical cable in the same way as the existing optical cables. You can also
remove all existing cable ties and bind all optical cables again if necessary.
----End
7.2.6.5 Connecting an IB Cable
Procedure
Step 1
Determine the model of the new cable.
You can use an optical cable or a QSFP+ cable.
Step 2
Number the new cable.
l
The number of the new cable must be the same as that of the old one.
l
Use the same type of labels for the optical cable.
–
Record the name and number of the local device to be connected on one side of the
label, and those of the peer device on the other side.
–
Attach the label 2 cm (0.79 in.) away from the end of the optical cable.
Step 3
Lay out the new cable.
l
Lay out the new cable in the same way as the old one.
For example, if the old cable is laid out in underfloor cabling mode, so is the new cable.
l
Lay out optical cables or QSFP+ cables in the cabinet based on installation requirements.
You are advised to arrange cables in the same way as existing cables. Ensure that cables
are routed neatly and undamaged.
l
Separate optical cables or QSFP+ cables from power cables and signal cables when
laying out the cables.
l
The minimum bend radius of an optical cable or QSFP+ cables is 4 cm (1.57 in.).
l
Ensure that optical cables or QSFP+ cables are laid out for easy maintenance and
capacity expansion.
l
Optical cables must be bound using cable ties. Ensure that:
–
Optical cables are bound closely, neatly, and straight.
–
Cable ties are in even distance and fastened properly.
Step 4
Replace the cable.
1.
Remove the cable to be replaced.
Release the latch and remove the cable.
FusionServer Pro 2288H V5 Server
User Guide
7 Installation and Configuration
Issue 08 (2019-10-30)
Copyright © Huawei Technologies Co., Ltd.
92
