Huawei ePico3801 страница 51 Скачать руководство пользователя

Страница: 51 / 75

Reconfiguring the ePico3801

About This Chapter

This chapter describes common reconfiguration items during the normal running of the
ePico3801.

5.1 Configuring Automatic Network Planning Parameters

This chapter describes how to configure the automatic network planning parameters for the
ePico3801 on the AP Manager (APM). For the deployment of most ePico3801s, the automatic
network planning mode ensures a good radio environment.

5.2 Setting ePico Cell Parameters

This chapter describes how to set or modify the ePico cell parameters manually. This mainly
introduces common configuration methods of the ePico cell parameters, including modifying
the cell status, modifying the cell frequency and scramble code, and setting the maximum TX
power.

5.3 Modifying Automatic Pilot Adjustment Parameters

This chapter describes how to modify the automatic pilot adjustment parameters. You need to
set the automatic pilot adjustment parameters for the ePico3801 to ensure that the interference
is effectively reduced and the voice quality meets the requirements. In normal cases, these
parameters need not be modified after the parameter setting is complete.

5.4 Adjusting Mobility Management Parameters

This chapter describes how to adjust the ePico3801 parameters related to the cell reselection and
handover if required. In normal cases, the information of the ePico cell is configured through
automatic network planning. No manual configuration is required.

5.5 Adjusting the Transport Network

This chapter describes how to adjust the transport network of the ePico3801.

5.6 Adjusting the ePico3801 Functions

This chapter describes how to adjust the application of the ePico3801 basic functions. The basic
functions consist of the HSPA status, emergency call redirection switch, permission reject
reason, location indication mode, differentiated billing mode, and location positioning mode.

ePico3801
User Guide

5 Reconfiguring the ePico3801

Issue 01 (2009–09–23)

Huawei Proprietary and Confidential

5-1

Содержание ePico3801












































































Результаты поиска

Содержание ePico3801

Отзывы:

Похожие инструкции для ePico3801

Бренды по названию

Популярные бренды

Huawei ePico3801, Руководство пользователя

Результаты поиска

Содержание ePico3801

Отзывы:

Похожие инструкции для ePico3801

Бренды по названию

Популярные бренды