l
Receives alarms from the managed device and locates and rectify device faults based on
the alarm information.
In the following configuration, after basic SNMP functions are configured, the NM station can
manage the device in these manners. For details on how to configure finer management such as
accurate access control or alarm module specification, see the following configuration
procedures.
1.4.1 Establishing the Configuration Task
Before configuring a device to communicate with an NM station by running SNMPv3,
familiarize yourself with the applicable environment, complete the pre-configuration tasks, and
obtain the data required for the configuration. This will help you complete the configuration task
quickly and accurately.
Applicable Environment
SNMP needs to be deployed in a network to allow the NM station to manage network devices.
Assume your network has a strict requirement on security, only authorized administrators can
manage network devices, and the security and accuracy of transmitted network data need to be
ensured. For example, the data between the NM station and managed devices is transmitted over
a public network. In this case, SNMPv3 can be deployed. The authentication and encryption
functions provided by SNMPv3 ensure the security of data sending and normal communication
between the NM station and managed devices.
Pre-configuration Tasks
Before configuring a device to communicate with an NM station by running SNMPv3, complete
the following task:
l
Configuring a routing protocol to ensure that the switch and NM station are routable
Data Preparation
Before configuring a device to communicate with an NM station by running SNMPv3, you need
the following data.
No.
Data
1
SNMP version, user name and user group name, address of the alarm destination host,
administrator's contact information and location, and SNMP packet size
2
(Optional) ACL number, IP address of the NM station, and MIB object
3
(Optional) Name of the alarm-sending module, source address of trap messages,
queue length for trap messages, and lifetime of trap messages
4
(Optional) Number of interfaces indexed by fixed numbers
Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management
1 SNMP Configuration
Issue 01 (2011-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
26