manualshive.com logo in svg

Huawei Enterprise S2700 Series, Руководство по настройке, Страница: 300 / 354

Поделиться
Скачать
Huawei Enterprise S2700 Series Скачать руководство пользователя страница 300

   Max Negative SD:1                    Max Negative DS:1                       
   Negative SD Number:15                Negative DS Number:1                    
   Negative SD Sum:15                   Negative DS Sum:1                       
   Negative SD Square Sum:15            Negative DS Square Sum:1                
   Min Delay SD:0                       Min Delay DS:0                          
   Avg Delay SD:27                      Avg Delay DS:1                          
   Max Delay SD:1                       Max Delay DS:1                          
   Packet Loss SD:0                     Packet Loss DS:0                        
   Packet Loss Unknown:0                jitter out value:0.0312500              
   jitter in value:0.0020833            NumberOfOWD:60                           
   OWD SD Sum:27                        OWD DS Sum:1
   TimeStamp unit: ms 

6.15 Configuring Universal NQA Test Parameters

This section describes how to set and use universal parameters for NQA test instances.

6.15.1 Establishing the Configuration Task

Before setting universal parameters for NQA test instances, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the required data. This
can help you complete the configuration task quickly and accurately.

Applicable Environment

NQA supports not only the configuration of the parameters for various types of tests, but also
the configuration of universal options of a test group.

Commonly, the default configurations of the universal parameters are adopted.

Pre-configuration Tasks

Before configuring universal NQA parameters, create NQA tests correctly.

6.15.2 Configuring Universal Parameters for the NQA Test Instance

This part describes the application of each parameter in the NQA test instance.

Context

Do as follows on the NQA client:

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

nqa

 

test-instance

 

admin-name

 

test-name

The NQA test instance view is displayed.

Step 3

Perform the following as required to configure universal parameters:

Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management

6 NQA Configuration

Issue 01 (2011-07-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

290

Содержание Enterprise S2700 Series



































































































































































































































































































































































Отзывы:

Нет отзывов