Huawei EchoLife ET325, Руководство пользователя

Страница: 46 / 72

Manual do Usuário - EchoLife
ET325 IP Phone
4 Guia de Configuração
41
Campo Descrição
Via TFTP
Server
IP address of the configured TFTP server. When it is
selected, if the value is not zero or not blank, the ET325
will attempt to retrieve a new configuration file or a new
code image from the specified TFTP server at the boot
time. With three attempts before timeout, it will start the
boot process with the existed code image in the FLASH
memory. If a TFTP server is configured and a new code
image is retrieved, the new downloaded image will be
verified and then saved into the FLASH memory.
NOTE
When adopting the TFTP upgrade software, you are
strongly recommended to upgrade the firmware in the
local LAN environment. Do not interrupt the TFTP
upgrade process (especially the power supply) to
prevent the device from being damaged.
Via HTTP
Server
URL of the HTTP server used for firmware upgrade and
configuration through HTTP, for example,
um.huawei.com/etphone .
NOTE
If Auto Upgrade is set to No , the ET325 will perform
only the HTTP downloading when it boots up.
Firmware
Server Path
Configure the IP address or domain name of the
Firmware upgrade/degrade server.
Config Server
Path Configure the IP address or domain name of the Config
upgrade/degrade server.
Firmware File
Prefix/postfix The default value is null. If it is configured, the phone will
request the firmware file with the prefix/postfix. This
setting is useful for ITSPs. The end user should keep it
blank.
Config File
Prefix/postfix The default value is null. The end user should keep it
blank.