HUAWEI EC122 CDMA
1X EVDO Rev.A
USB Stick
Quick Start
Thank you for choosing the Mobile Broadband
USB Stick. With your USB Stick, you can access
a wireless network at high speed.
Note:
This manual describes the appearance of the USB Stick, as well as the
procedures for preparation, installation, and removal. For operation details
about the management program, see the online help included in the
management program.
Getting to Know Your USB Stick
The following figure shows the appearance of the USB Stick. It is provided
only for your reference. The actual product may be different.
1
2
3
4
n
USB Connector
It connects the USB Stick to a PC.
o
Indicator
It indicates the status of the USB Stick.
z
Solid: The USB Stick is powered on.
z
Blinking once every 2s: The USB Stick is searching for a network or no
network is found.
z
Blinking twice every 2s: The USB Stick finds a network.
z
Blinking once every 0.2s: The USB Stick is transmitting data.
p
MicroSD Card Slot
It holds a microSD card.
q
UIM Card Slot
It holds a User Identity Module (UIM) card.
Getting Your USB Stick Ready
1.
Slide the back cover to remove it from the USB Stick.
2.
Insert the UIM card and the microSD card into the corresponding
card slots, as shown in the following figure.
3.
Replace the back cover and slide it into place.
Note:
z
The microSD card is an optional accessory. If it is not provided in the
package, you can buy one yourself.
z
Ensure that the beveled edge of the UIM card is properly aligned with
that of the UIM card holder and the microSD card is inserted according
to the direction as labeled on the microSD card slot.
