manualshive.com logo in svg

Huawei CX320, Руководство пользователя

Поделиться
Скачать
Huawei CX320 Скачать руководство пользователя страница 112

A

 Appendix

A.1 Logging In to the CX320 BIOS

Log in to the BIOS of the CX320 through the serial port or using SOL. The BIOS is used to
debug the CX320.

l

If the software version of the switching plane is earlier than 6.30, log in to the switching
plane CLI through the serial port and then access the BIOS. There is no other way to
access the BIOS. If the software version of the switching plane is 6.30 or later, log in to
the switching plane CLI over SOL or serial port and then access the BIOS.

l

For the switching plane versions from 6.30 to 6.56 (excluding 6.56), if you access the
switching plane CLI over SOL and then the BIOS, the operations such as changing the
password and system upgrade through disk formatting cannot be performed on the BIOS.
These operations are supported on the BIOS from switching plane version 6.56.

The BIOS initializes hardware, such as serial ports or dual in-line memory modules
(DIMMs), reads the kernel image from the flash memory to the random access memory
(RAM), and starts the operating system (OS). In the BIOS, you can load underlying software
and debug underlying devices.

Prerequisites

Data

Password for logging in to the BIOS of the CX320.

Procedure

Step 1

Log in to the GE switching plane CLI through the serial port or using SOL. For details, see

4.4

Logging In to the CLI of Each Switching Plane

 .

Step 2

Log in to the CX320 BIOS.

CX320 Switch Module
User Guide

A Appendix

Issue 09 (2019-08-02)

Copyright © Huawei Technologies Co., Ltd.

106

Содержание CX320


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды