Figure 3-30
AR503EDGW-Lo appearance
1
Power input jack
NOTE
Use a DC power cable to connect the router
to an external power source.
2
LTE1 antenna interface
3
LTE0 antenna interface
4
GPS/BDS antenna interface
5
Three Wi-Fi antenna interfaces
6
LAN interfaces: four GE electrical
interfaces
NOTE
l
LAN interfaces GE0 to GE3 can be
configured as WAN interfaces.
l
GE0 is a management interface and is
used to upgrade the router.
7
USB interface (host)
8
RST button
NOTE
This button is used to reset the router.
l
To restore the factory settings, hold down
the button for at least 5 seconds.
l
To reset the system, press the button.
Resetting the router will interrupt services.
Exercise caution when deciding to press this
button.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06)
Copyright © Huawei Technologies Co., Ltd.
207