manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 68 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 68

3.4.2 Configuring ACL-based Packet Filtering in an Interzone

The packet filtering firewall filters packets through ACLs.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

acl

 [ 

number

 ] 

acl-number

 [ 

match-order

 {

 config

 |

 auto

 }]

An ACL is created and the ACL view is displayed.

Step 3

Run:

rule

An ACL rule is configured.

Step 4

Run:

quit

Return to the system view.

Step 5

Run:

firewall interzone

 

zone-name1

 

zone-name2

The interzone view is displayed.

Step 6

Run:

packet-filter

 

acl-number

 { 

inbound

 | 

outbound

 }

The ACL-based packet filtering is configured.

You can configure ACL-based packet filtering in the interzone for incoming or outgoing packets.

Step 7

(Optional) Run:

packet-filter

 

default

 { 

deny

 | 

permit

 } { 

inbound

 | 

outbound

 }

The default processing mode for unmatched packets is configured.

In the default settings of the system, the outbound unmatched packets are allowed, and the
inbound unmatched packets are denied.

If an ACL is applied to the inbound or outbound packets of an interzone, the packets are filtered
according to the ACL rules. If packets do not match the ACL, the default processing mode is
used.

NOTE

During the modification of interzone filtering rules, some sessions may not be filtered properly according
to the rules. Therefore, after the modification is complete, use the 

reset firewall session all

 command to

delete all existing firewall session entries.

----End

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

3 Firewall Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

54

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов