manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 39 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 39

By default, the time for the primary HWTACACS server to return to the active state is 5 minutes.

Step 16

(Optional) Run:

quit

Return to the user view.

Step 17

(Optional) Run:

hwtacacs-server accounting-stop-packet

 

resend

 { 

disable

 | 

enable

 

number

 }

Retransmission of accounting-stop packets is configured.

You can enable retransmission of accounting-stop packets and set the retransmission count, or
disable the function. By default, the retransmission function is enabled and the retransmission
count is 100.

Step 18

(Optional) Run:

return

Return to the user view.

Step 19

(Optional) Run:

hwtacacs-user change-password hwtacacs-server

 

template-name

The password saved on the HWTACACS server is changed.

----End

1.5.4 Configuring a Domain

The created authentication scheme, authorization scheme, accounting scheme, and
HWTACACS server template take effect only after being applied to a domain.

Context

Before configuring a domain, ensure that the authentication scheme, authorization scheme,
accounting scheme, and HWTACACS server template have been created.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

aaa

The AAA view is displayed.

Step 3

Run:

domain

 

domain-name

A domain is created and the domain view is displayed.

The AR1200-S has two default domains: 

default

 and 

default_admin

. The 

default

 domain is

used by common access users and the 

default_admin

 domain is used by administrators.

Step 4

Run:

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

1 AAA Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

25

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов