Huawei AR1200-S Series Скачать руководство пользователя страница 30

Страница: 30 / 308

By default, the traffic unit is byte on the AR1200-S.

Step 11

(Optional) Run:

radius-server

{

retransmit

retry-times

timeout

time-value

}

The number of times RADIUS request packets are retransmitted and timeout interval are set.

By default, the number of transmission times is 3 and the timeout interval is 5s.

Step 12

(Optional) Run:

radius-server nas-port-format

{

new

old

}

The format of the Network Access Server (NAS) port attribute is set.

By default, the new format of the NAS port attribute is used.

Step 13

(Optional) Run:

radius-server nas-port-id-format

{

new

old

}

The format of the NAS port ID attribute is set.

By default, the new format of the NAS port ID attribute is used.

Step 14

(Optional) Run:

radius-attribute nas-ip

The RADIUS NAS-IP-Address attribute is set.

Step 15

(Optional) Run:

return

Return to the user view.

Step 16

(Optional) Run:

test-aaa

user-name

user-password

radius-template

template-name

[

chap

pap

]

You can test whether a user can be authenticated using RADIUS authentication.

----End

1.4.4 Configuring a Domain

The created authentication scheme, accounting scheme, and RADIUS server template take effect
only after being applied to a domain.

Context

Before configuring a domain, ensure that the authentication scheme, accounting scheme, and
RADIUS server template have been created.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

aaa

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

1 AAA Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Содержание AR1200-S Series





















































































































































































































































































































Результаты поиска

Содержание AR1200-S Series

Отзывы:

Huawei AR1200-S Series, Руководство по настройке, Страница: 30 / 308

Результаты поиска

Содержание AR1200-S Series

Отзывы: