Huawei AR1200-S Series Скачать руководство пользователя страница 212

Страница: 212 / 308

acl-number

specifies the number of an advanced ACL. The value ranges from 3000

to 3999.

match-order

specifies the matching order of advanced ACL rules:

–

auto

: indicates that ACL rules are matched based on the depth first principle.

–

config

: indicates that ACL rules are matched based on the sequence in which they

were configured.

(Optional) Run:

description

text

The description of the advanced ACL is configured.

The description of an ACL describes the function or usage of the ACL. It is used to
differentiate ACLs.

By default, no description is configured for an ACL.

----End

Follow-up Procedure

Configure rules in the advanced ACL.

10.4.4 Configuring an Advanced ACL Rule

An advanced ACL is composed of a list of rules. The ACL classifies packets by matching packet
information with the ACL rules.

Prerequisites

An advanced ACL has been created and the advanced ACL view is displayed.

Before creating a new rule, run the

display acl

{

acl-number

name

acl-name

} command to

view all the configured ACL rules to prevent the new rule from overriding existing rules.

Context

An advanced ACL classifies packets by matching packet information with its rules. After an
advanced ACL is created, configure rules in the advanced ACL.

Procedure

Step 1

(Optional) Run:

step

step-value

The step value between ACL rule IDs is set.

By default, the step value is 5.

Step 2

Configure an advanced ACL rule based on the IP protocol version or the type of the protocol
over IP.

When IPv4 is used, run:

rule

{

deny

permit

}

[

destination

{

destination-address destination-wildcard

any

} |

source

{

source-address source-wildcard

any

} |

time-range

time-name

vpn-instance

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

10 ACL Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

198

Содержание AR1200-S Series





















































































































































































































































































































Результаты поиска

Содержание AR1200-S Series

Отзывы:

Huawei AR1200-S Series, Руководство по настройке, Страница: 212 / 308

Результаты поиска

Содержание AR1200-S Series

Отзывы: