Huawei AR1200-S Series Скачать руководство пользователя страница 205

Страница: 205 / 308

Follow-up Procedure

Configure rules in the basic ACL.

10.3.4 Configuring a Basic ACL Rule

A basic ACL is composed of a list of rules. The ACL classifies packets by matching packet
information with the ACL rules.

Prerequisites

A basic ACL has been created and the basic ACL view is displayed.

Before creating a new rule, run the

display acl

{

acl-number

name

acl-name

} command to

view all the configured ACL rules to prevent the new rule from overriding existing rules.

Context

A basic ACL classifies packets by matching packet information with the ACL rules. After a
basic ACL is created, configure rules in the basic ACL.

Procedure

Step 1

(Optional) Run:

step

step-value

The step value between ACL rule IDs is set.

By default, the step value is 5.

Step 2

Run:

rule

{

deny

permit

} [

source

{

source-address source-wildcard

any

} |

time-

range

time-name

vpn-instance

vpn-instance-name

| [

fragment

none-first-

fragment

] ]

A basic ACL rule is configured.

To configure multiple rules, repeat this step.

NOTE

If the rule ID is not specified, the step value is used as the start rule ID.

If different rules are ANDed or ORed, configure a correct matching order to prevent incorrect configurations.

Step 3

(Optional) Run:

rule

rule-id

description

text

The description of the basic ACL rule is configured.

The description of an ACL rule describes the function or usage of the ACL rule. It is used to
differentiate ACL rules.

----End

Follow-up Procedure

After a basic ACL rule is configured, perform the following operations as required:

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

10 ACL Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

191

Содержание AR1200-S Series





















































































































































































































































































































Результаты поиска

Содержание AR1200-S Series

Отзывы:

Huawei AR1200-S Series, Руководство по настройке, Страница: 205 / 308

Результаты поиска

Содержание AR1200-S Series

Отзывы: