manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 186 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 186

2.

(Optional) Run:

auto-defend alarm threshold

 

threshold

The alarm threshold for attack source tracing is set.

By default, the alarm threshold for attack source tracing is 128 pps.

Step 10

In the system view, run:

cpu-defend-policy

 

policy-name

 [ 

global

 | 

slot

 

slot-id

 ]

The attack defense policy is applied.

If the attack defense policy is applied to an LPU or SRU, it takes effect for only the packets sent
to the CPU of the LPU or SRU.

If 

global

 or 

slot

 is not specified, the attack defense policy is applied to the SRU. If 

global

 is

specified, the attack defense policy is applied to all LPUs. If 

slot

 is specified, the attack defense

policy is applied to an LPU in a specified slot.

NOTE

Attack source tracing configured in an attack defense policy takes effect only when the attack defense policy is
applied to the SRU.

----End

Checking the Configuration

# Run the 

display auto-defend attack-source

 command to view the attack source list on the

SRU.

# Run the 

display auto-defend configuration

 command to view the configuration of attack

source tracing.

# Run the 

display cpu-defend policy

 command to check the attack defense policy.

9.4 Configuring CPU Attack Defense

CPU attack defense limits the rate of packets sent to the CPU to protect the CPU.

9.4.1 Establishing the Configuration Task

Before configuring an attack defense policy, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the data required for the
configuration. This will help you complete the configuration task quickly and accurately.

Applicable Environment

When a large number of users connect to the AR1200-S, the AR1200-S may be attacked by the
packets sent to the CPU or needs to process a large of number of these packets. The AR1200-
S can limit the rate of all the packets sent to the CPU to protect the CPU.

CPU attack defense provides hierarchical device protection:

l

Level 1: The AR1200-S uses blacklists to filter invalid packets sent to the CPU.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

9 Local Attack Defense Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

172

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов