manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 167 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 167

Checking the Configuration

# Run the 

display current-configuration | include icmp

 command to check the configuration

of the highest rate at which ICMP packets are received.

<Huawei> 

display current-configuration | include icmp

 icmp rate-limit enable                                            
 icmp rate-limit threshold 120                           

7.4 Configuring the AR1200-S to Discard Specified ICMP
Packets

This section describes how to configure the AR1200-S to discard specified ICMP packets.

7.4.1 Establishing the Configuration Task

Before configuring the AR1200-S to discard specified ICMP packets, familiarize yourself with
the applicable environment, complete the pre-configuration tasks, and obtain the required data.
This can help you complete the configuration task quickly and accurately.

Applicable Environment

The AR1200-S receives a large number of ICMP packets from the network, and these packets
consume a lot of CPU resources. The AR1200-S can be configured to discard seldom-used ICMP
packets, including the ICMP packets with the TTL values of 1, with options, and with
unreachable destinations. This helps reduce the burden of processing ICMP packets that are
received on the AR1200-S, protecting CPU resources.

Pre-configuration Tasks

Before configuring the AR1200-S to discard specified ICMP packets, complete the following
task:

l

Setting parameters for the link layer protocols on the interfaces to ensure that the link layer
protocols are Up

Data Preparation

None.

7.4.2 Configuring the AR1200-S to Discard the ICMP Packets with
TTL Value of 1

This section describes how to configure the AR1200-S to discard the ICMP packets with the
TTL value of 1.

Context

The AR1200-S receives a large number of ICMP packets from the network, and these packets
consume a lot of CPU resources. The AR1200-S can be configured to discard the ICMP packets
with the TTL value of 1. This helps reduce the burden on the AR1200-S and protect CPU
resources.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

7 ICMP Security Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

153

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов