manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 153 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 153

By default, rate limiting of ARP packets is disabled.

4.

Run:

arp anti-attack rate-limit

 

packet-number

 [ 

interval-value

 ]

The rate limit duration and the rate limit of ARP packets are set.

After the rate limit duration and the rate limit of ARP packets are set, ARP packets
whose rate exceeds the rate limit in the rate limit duration are discarded. By default,
the rate limit of ARP packets is 100 and the rate limit duration of ARP packets is 1s.

5.

(Optional) Run:

arp anti-attack rate-limit alarm enable

The alarm function for ARP packets that are discarded when the rate of ARP packets
exceeds the rate limit is enabled.

By default, the alarm function for ARP packets that are discarded when the rate of
ARP packets exceeds the rate limit is disabled.

6.

(Optional) Run:

arp anti-attack rate-limit alarm threshold

 

threshold

The alarm threshold for the number of ARP packets discarded when the rate of ARP
packets exceeds the rate limit is set.

By default, the alarm threshold for the number of ARP packets discarded is 100.

----End

6.5.4 Configuring Source IP Address-based ARP Miss Packet
Suppression

This section describes how to configure source IP address-based ARP Miss packet suppression.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

arp-miss speed-limit source-ip

 

maximum

 

maximum

The rate limit of ARP Miss packets is set.

Step 3

(Optional) Run:

arp-miss speed-limit source-ip

 

ip-address

 

maximum

 

maximum

The rate limit of ARP Miss packets with a specified source IP address is set.

After the preceding configurations are complete, the rate limit of ARP Miss packets with a
specified source IP address is specified by 

maximum

 in step 3, and the rate limit of ARP Miss

packets with other source IP addresses is specified by 

maximum

 in step 2.

If the rate limit of ARP packets is 0, ARP Miss packets are not suppressed. By default, the rate
limit of ARP Miss packets is 5 pps.

----End

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

6 ARP Security Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

139

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов