manualshive.com logo in svg

Huawei 9000 VCT V100R011, Руководство администратора, Страница: 82 / 204

Поделиться
Скачать
Huawei 9000 VCT V100R011 Скачать руководство пользователя страница 82

5

 Initiating a Conference

About This Chapter

The terminal supports multiple methods for initiating a conference. You can choose one based
on the actual situation.

5.1 Initiating a Conference Using Different Methods

The home screen provides multiple methods to initiate a conference. You can choose one based
on the actual situation.

5.2 Answering Incoming Calls and Ending a Conference

The mode for answering incoming calls can be set.

5.3 Setting Conference Parameters

The factory settings and default settings of the conference parameters can help the conduct of
conferences. The parameters can also be set based on actual requirements.

5.4 Experiencing an HD Conference

To enjoy HD effects, all the relevant devices, including the camera, video terminal, and display
device, should support the HD capability.

5.5 Experiencing an H.239 Dual-Stream Conference

During an H.239 dual-stream conference, two independent video stream channels, that is, the
video and the presentation, can be transmitted; furthermore, two channels of video from the local
site can be transmitted or two channels of video from a remote site can be received at the same
time.

5.6 Joining an Authentication Conference

If the number of sites that are expected to join the conference is not known, you can set the
number of anonymous sites, and then hold an authentication conference. A site can join the
authentication conference by calling the conference access number.

5.7 Joining an HD-Video Conference over an IMS Network

The terminal can join an HD video conference over an IMS network.

5.8 Managing the Address Book

The address book stores site information. You can add, edit, and delete site entries.

HUAWEI 9000 HD Video Terminal
Administrator Guide

5 Initiating a Conference

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

70

Содержание 9000 VCT V100R011













































































































































































































Отзывы:

Нет отзывов