manualshive.com logo in svg

Huawei 5288 V5, Руководство по приемке, Страница: 13 / 29

Поделиться
Скачать
Huawei 5288 V5 Скачать руководство пользователя страница 13

Prerequisites

The ambient temperature and humidity in the equipment room and
the altitude of the equipment room meet server operating
requirements. For details about the requirements, see the server
installation guide.

Procedure

1. Install guide rails.
2. Lift the server (at least two persons are required), place it on

the guide rails, and slide it along the guide rails into the
cabinet.

3. Properly connect power cables from the server to the rack

based on the power distribution requirements of the equipment
room. Before connection, check whether the server is equipped
with one PSU or two PSUs in 1+1 redundancy mode.

Expected Results

1. The server is properly installed in the cabinet.
2. The power distribution in the cabinet is appropriate.

Test Result

Remarks

 

4.1.4 Powering On the Server

Case No.

4.1.4

Test Objective

To verify that the server can be properly powered on.

Test Networking
Diagram

N/A

Prerequisites

The ambient temperature and humidity in the equipment room
and the altitude of the equipment room meet server operating
requirements. For details about the requirements, see the server
user guide.

5288 V5 Server
Acceptance Guide

4 Test Cases and Records

Issue 03 (2019-03-25)

Copyright © Huawei Technologies Co., Ltd.

8

Содержание 5288 V5






























Отзывы:

Нет отзывов