Supplied Parts and Hardware
Step 1
Secure the legs to the tabletop.
B
A
Step 2
Press and hold the button on the joint of the leg then rotate the leg
to your desired angle.
Note:
Please refer to the procedures in page 4 for more detail.
The angles of the two legs must be the same.
- 1 -
1PC
Laptop Tray
1PC Leg
1PC Leg
1PC Mouse Tray
1PC Cable
2PCS
Edge Stopper
A
Bolt M5X8mm
8PCS
B
5/32in. (4mm)
1PC Allen Key
Step 3
Secure the mouse tray to the side of laptop tray
- 2 -
Step 4
Secure the edge stoppers to the front lip of the laptop tray.
How to Use the Cooling Fan
Connect the USB end of the cable to your laptop, then connect the other
end of the cable to the port of the cooling fan.
Turn on the switch when use the cooling fan.
OPEN
- 3 -
