HTW XKRB1, Руководство пользователя

Страница: 26 / 44

2
Wired controller installation steps:
Installation of Wired Controller
The simple installation step of wired controller is as shown on the figure, please notice below
issues:
● Pull out the 4 core twisted pair wire from the mounting hole and pass this line through the
oblong hole located at the bottom of the wired controller.
● Use M4×25 screws to fix the base plate together with installation hole of the wall.
● Insert the through signal wire in the slot on the wired controller , also lock the wired
controller panel and base plate together.
● Then use ST2.2×4.5 screw to fixed the wired controller panel and base plate together.
Installation and Disassembly
2
1
Clips