HTW VAX HTW-ATS-O-500VAX, Инструкция для владельца и по установке

Страница: 23 / 35

22
PARAMETER CHECKING AND ADUSTMENT
Parameter list
Some system parameters can be checked and adjusted by the controller. Below is the parameter
list:
Parameter
No.
Description Range Default Remarks
0 Tank water setting temp. 10 ~ 70°C 50°C Adjustable
1
Water temperature gap
to restart
2 ~ 15°C 5°C Adjustable
2 E-heater off tank water temp 10 ~ 85°C 55°C Adjustable
3 E-heater delay time 0 ~ 90min 6 t * 5 min
4 Week disinfection temperature 50 ~ 70°C 70°C Adjustable
5 High temp disinfection time 0 ~ 90 min 30 min Adjustable
6 Defrosting period 30~90 min 45 min Adjustable
7 Defrosting entry coil temp. -30 ~ 0°C -7°C Adjustable
8 Defrosting exit coil temp. 2 ~ 30°C 13°C Adjustable
9 Max defrosting cycle period 1 ~ 12 min 8 min Adjustable
10
Electronic expansion valve
adjustment
0/1 1
Adjustable (0-manual
，
1-auto)
11 Target over-heat degree -9 ~ 9°C 5°C Adjustable
12
Steps of manually adjusting the
electronic expansion valve
10 ~ 50 step 35 step Adjustable
13
Disinfection start up time
adjusting
0~23 23 Adjustable(hour)
14 Parameter of solar water pump 0/1 0 Adjustable( 0 without
water pump
，
1with water
pump)
15 Solar water pump star return
difference 2-20
℃
10 Adjustable
16 High temp disinfection
frequency
7-28day 7 Adjustable
A Inlet water temp. sensor
detect range
-9 ~ 99°C
Actual testing value. Error code P1
will be shown in case of a
malfunction
B Outlet water temp. sensor
detect range
-9 ~ 99°C
Actual testing value. Error code P2
will be shown in case of a
malfunction
C
Evaporator coil temp.
sensor detect range
-9 ~ 99°C
Actual testing value. Error code P3
will be shown in case of a