N70 Imaging Unit
Quick Installation Guide
HTS Proprietary
Page 3
Chapter 1
Safety and Certifications
NOTICE
Please read this guide thoroughly and save it for future use before attempting to connect or
operate this unit.
1.1
Safety Instructions
HAZARD: Please follow the safety instructions below. Failure to adhere to the
instructions could result in personal injury to the user.
This unit operates at 12VDC and using PoE+ only.
Installation and service should be performed only by qualified and
experienced technicians and comply with all local codes and rules in order
to maintain your warranty.
Wipe the imaging unit with a dry soft cloth. For tough stains, apply a small
quantity of diluted neutral detergent and wipe dry with a soft cloth.
Do not apply benzene, gasoline, or thinner to the imaging unit, which may
melt the surface of the unit or cause fogging in the lens.
Avoid aligning the lens to very bright objects (for example, light fixtures)
for long periods of time.
Avoid operating or storing the unit in the following locations:
o
Extremely humid, dusty, or hot/cold environments
(recommended operating temperature: -30°C to +50°C)
o
Close to sources of powerful radio or TV transmitters
o
Close to fluorescent lamps or objects with reflections
o
Under unstable or flickering light sources
o
For eye safety – avoid looking directly to the LED`s illumination
beam
