Htek UC912E Скачать руководство пользователя страница 77

Страница: 77 / 136

Basic Call Features

Note:
1. If

does not answer the call,

can back to continue the conversation with

;

2. Once

hangs up the call, the conference is ended, while if

drops the call,

conversation continues.

3. The conference feature is not available on all servers. For more information,

contact your system administrator.

4. To realize the 5 way conference, the line should be all available.

Call Forward

This phone supports static forward (always forward, busy forward and no answer forward)
and dynamic forward

To configure static forward

To configure always forward

With this feature, all incoming calls will forward immediately to configured number.

1. Press Menu → Features → Call Forward →Always Forward.

2. Press

and

or press Info/Switch soft key to select the enable choice

3. Enter the Forward To number.

4. Press

or Save soft key to save the configuration.

To configure busy forward

With this feature, the incoming calls are immediately forwarded if the phone is busy.

1. Press Menu →Features → Call Forward →Busy Forward.

2. Press

and

or press Info/Switch soft key to select the enable choice.

Содержание UC912E









































































































































Результаты поиска

Содержание UC912E

Отзывы:

Похожие инструкции для UC912E

Бренды по названию

Популярные бренды

Htek UC912E, Руководство пользователя

Результаты поиска

Содержание UC912E

Отзывы:

Похожие инструкции для UC912E

Бренды по названию

Популярные бренды