HTC HTC 800 RXP, Руководство пользователя

Страница: 13 / 28

5 Operation
5.1 Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.
5.2 To adjust the handle
WARNING: There is a risk of crush injuries
when adjusting the handle into the desired
position. Make sure the handle lock locks
properly in the desired position.
1. Loosen the handle by turning the handle lock to the
left or the right.
2. Move the handle to the desired position. The handle
locks automatically in the desired position.
3. Make sure that the handle lock returns to the original
position to guarantee that the handle is locked
properly.
5.2.1 Handle positions
3
2
1
1. Position 1
Use this position for transportation.
2. Position 2
Use this position when you tipp the machine (to
change the tools). This position can be used when
you operate the machine with the radio control unit.
3. Position 3
Always use this position when you operate the
product manually. This position can be used when
you operate the machine with the radio control unit.
5.3 To adjust the drive lock on the wheels
The machine has a lock mechanism on each wheel. Use
the drive lock to release or attach the wheels to its drive
motors.
•
Release the drive lock to move the machine
manually.
• Lock the wheels to move the machine with the
operating panel or the radio control unit.
Note: During troubleshooting, the wheels can be
released from the drive motors and test driven without
the machine moving.
1. Pull out the locking pin.
2. Turn the locking pin 90 and release it.
To lock the wheels do the instructions in the opposite
sequence.
888 - 001 - Operation - 13