9
9. Operating Instruction
9.1 Operating steps:
①
Hold the meter by its handle grip and point it toward the surface
to be measured.
②
Pull and hold the Trigger to turn the meter on, the "SCAN" icon
will appear and begin testing.
③
The surface temperature being tested will be displayed on the
LCD screen.
④
Release the trigger, the "HOLD" icon will appear, and the
reading will be held for several seconds.
⑤
The meter will automatically shut off after 35 seconds.
Measurement Note
：
If the meter used in an ambient temperature
with wide temperature change, awaiting it at least 30 minutes to
adjust it.
The laser is designed for aiming only; it can be shut off while
operating in short distance to save the battery.
