Introduction
HTC GL 40 D
2
2.0
Note!
This symbol means
Note!
and indicates a potential risk of material damage in
the event of incorrect use of the machine. If you see this symbol next to a
section of text, you must pay particular attention when reading through the text
and not carry out any operations of which you are unsure. This is to avoid
damage to the machine.
Tip!
This symbol means
Tips!
and implies the inclusion of tips and advice on
effective use of the machine or ways of reducing wear and tear to the machine.
If you see this symbol next to a text, you should read through the text to make
your work easier and to extend the service life of the machine.
1.4
Transportation
Always ensure that the machine is emptied of dust and other particles before it is
transported, lifted or hoisted.
Always make sure that the machine is securely anchored to its surrounding during
transport to prevent it from coming into motion. Make sure that securing straps or other
equipment used for anchoring during transport are tightened over non-moving parts, e.g.
the machine's chassis.
When lifting the machine, do so according to chapter Lifting the machine, page
Do not transport the machine on steep sloping surfaces, e.g. loading ramps, without
securing it properly, for example with a winch. This is a safety measure in case the
machine starts to roll out of control. Also make sure that people (including operator) in
the vicinity are at a safe distance in order to prevent personal injury, in the event that the
machine starts to roll out of control.
When the machine is to be hoisted, it must be securely anchored in the notches for
secure lifting (position 4 Figure 3-2, page
), which are found on both of the chassis'
long sides. To prevent the machine from tipping, make sure to pull with equal force so
the machine does not twist askew and end up on its side.
The swivelling wheel must be pointing forwards in the direction of travel.
1.5
On delivery
The following items are included in the delivery. Contact your retailer if anything is
missing.
