HT VEGA74 Скачать руководство пользователя страница 10

Страница: 10 / 60

VEGA74

EN - 9

5. GENERAL MENU

Pressing the

ENTER

key in any condition of the instrument allows to go back to the

general menu in which internal parameters may be set, the saved measures can be
displayed and the desired measuring function may be selected.

Fig. 5: General menu of the instrument

5.1.

INSTRUMENT SETTINGS

Touch the

icon. The screen to the side appears on

the display. The following settings are available:

➢

System language setting

➢

System date/time setting

➢

Operator name setting

➢

Activation/deactivation of display AutoPower OFF and

of key sound

Settings will be maintained also after switching off the
instrument.

5.1.1. Language

Touch the icon

to select the system language. The

screen to the side appears on the display.

Select the desired language, confirm the choice and return
to the previous screen.

5.1.2. Automatic Power OFF for display and key sound

Touch the

icon. The screen to the side appears on the

display.

Move the slide bar reference of section "

" down/up to

turn off/on the Automatic Power OFF of the instrument after
a period of inactivity of 5 minutes.

Move the slide bar reference of section "

" down/up to

disable/enable the sound key when pressed. Confirm the
choices made and go back to the previous screen.

Содержание VEGA74





























































Результаты поиска

Содержание VEGA74

Отзывы:

Бренды по названию

Популярные бренды

HT VEGA74, Руководство пользователя

Результаты поиска

Содержание VEGA74

Отзывы:

Бренды по названию

Популярные бренды