connection diagram:
Fingerprint Access Control System
User Manual
Due to continuous update of our products
I.Product Overview and Installation Instruction
Applicable Models
Status light
Fingerprint-reading are
Keypad
Card-reading are
Doorbell
Rese
USB
Fixing hole
Operating Environment:
Room temperature: -20°C-+50°C
Relative humidity: 95%
Operating Voltage & Current:
Input DC: +12V
Standby current:≤60mA
Operating current:≤120m
Mounting screws
Set screw
II.Inputting Fingerprint
Suggested finger: index finger, middle finger or
ring finger instead of thumb or little finger
1)Correct method
Use the finger to evenly press
the center of fingerprint are
2)Wrong methods
Incomplete touch
Off cente
Turn sideway
Low position
Please input fingerprint correctly for verification,
and improper operation might
result in poor performance of this device
Ports & Wiring Diagram
Black
Wiring Diagram
Alarm Port
Relay Output Connection Diagra
High level output in case of alar
Red
Power
Alarm
Lock
Red
Black
Door open button
Gray
Blue
Orange
Purple
Yellow
Black
Pink
Light green
White
Green
Optional
Access controller
Optional
Note: negative pole
of normally-closed
to NC port;
normally-open
end to NO port
S.N.
Functions
Numeric keys
Tamper alarm
Reading head for data output
86mm box-type panel for installation
Built-in card reader
Dark-background fingerprint reader
User verification with fingerprint or card
Connect this device and breaker via NO, COM and NC
output to separate from internal circuit of this device.
Once relay gets closed, electric lock is released.
Contact output current:3A;
please refer to right diagram.
Connection Diagram
Access Control System
