GUI
8
3
GRAPHICAL USER INTERFACE (GUI)
3.1
General Form of Display
1-
Page title/Notification: the page title displays here as well as system notifications such as
alarms related to environmental status of the device. The notifications are as follows:
-
“
Battery is low! Please plug in the charger
” for when the battery life is below 15%.
-
“
Battery is low! PERIJA Plus will turn off soon
” for when the battery life is below 10%.
-
“
Memory is about to full
”
for when the free space of the memory is less than 2%.
-
“
Low temperature limit violation
” for when the inside temperature is less than
-5°C.
-
“
High temperature limit violation
” for when the inside temperature is more than 45°C.
-
“
Humidity limit violation
” for when the inside humidity percentage is more than 90%.
-
“
The sensor disconnected
” for when the sensor
does not plugged in.
-
“
The headphone disconnected
” for when no headpho
ne is used.
-
“
Poor GPS
” for when the GPS cannot find the required satellites.
2-
Date: the current date based on the Gregorian calendar is displayed here and the user can
adjust it if needed in the Time & Date Settings. Please note that the date and time do not
stop progressing when the device is turned off and the device always displays them
correctly as there is an internal backup battery to support these functions.
3-
Day of Week: the current day of the week is displayed here (Sat, Sun, etc.) Note that this
item set automatically based on the current date.
4-
Time Clock (in hour and minute): the current time is displayed here, and the user can
adjust it if needed in the Time & Date Settings.
5-
Bluetooth Status: the device Bluetooth status is displayed here as follows:
1)
Bluetooth is ON.
2)
Bluetooth connection is established.
6-
Charger Status: the plug sign indicated if the charger plugged correctly and battery is
charging.
