
Retail Fan
Heater
Thermostatically controlled portable
fan heater. With ‘tip over’ cut out.
Code 56118
Retail Fan
Heater
Operating & Safety Guide 319
Operating & Safety Guide 319
319/01
319/01
©HSS Hire Service Group Ltd 2012 No. 319/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.com
…any comments?
If you have any suggestions to enable us to improve the
information within this guide please e-mail your comments or
write to the Safety Guide Manager at the address below
e-mail: [email protected]
... have you been trained
The law requires that personnel using this type of equipment in
the workplace must be competent and qualified to do so.
Training is available at HSS Training
0845 766 7799
Never use the heater except for its intended purpose.
If
it will not do what you want i.e. the heat output is
insufficient for the area being heated, contact your local
HSS Hire for advice.
Only use the heater for the purpose it was designed for.
Improper use may cause expensive damage and could be
dangerous.
Keep the equipment clean
- you will find this less of a
chore if you clean it regularly, rather than wait until the end
of the hire period.
When not in use, store the equipment somewhere
clean, dry and secure.
EQUIPMENT CARE
FINISHING OFF
Switch off the heater and unplug from the mains.
Allow to cool down before moving it.
Neatly coil the flex ready for return.
TECHNICAL SPECIFICATIONS
Nominal voltage:
240V
Nominal power:
2800W
Nominal current:
13A
Waterproof Class:
IPX4
Self-resetting Thermostat:
0-40
o
C
Dimensions:
360 x 390 x 435 mm
Weight:
approx. 7.7 kg