HSD ES327, Руководство по сборке

Страница: 92 / 122

7 Programmed maintenance
92
HSD S.p.A. © - 0107h00a.fm100713
7.1 Daily maintenance
7.1.1 Control and cleaning of the tool holder seat and tool
holder cone
The surfaces of contact
between tool holder and tool
holder seat must be kept
clean to ensure a secure
coupling.
At the beginning of the
working day, make sure that
the surfaces highlighted in the
figures from
7 to 10 are clean,
and free of dust, grease,
coolant, oil, metal particles or
machining waste, as well as
free of traces of oxide or
scale;
if necessary,
clean with a
clean and soft cloth .
Figure 7:
ISO tool holder Figure 8:
ISO tool holder seat
(1) Conical
surfaces
(in black)
(2)
Contact
surfaces
(in grey, HSK
only)
Figure 9:
HSK tool holder Figure 10:
HSK tool holder seat
To clean the highlighted surfaces, use a soft clean cloth;
DO NOT use abrasive tools such as steel wool, metal brushes, emery cloth,
acids or any other aggressive means.
At the end of the working day clean the surfaces highlighted
in figures
from 7 to 10 with a soft and clean cloth; imperfect cleaning can lead to serious
consequences for the user's safety, the wear of the electrospindle and the tool
holder, and the accuracy and efficiency of the machining operation.
1
1
2
1
2
1