background image

CAUTION

:

All instructions and warnings must be followed

 

exactly

.

Mishandling of Li

-

Po batteries can result in a fire

,

personal injury

,

and/or property damage

.

• By handling

,

charging or using the included Li-Po battery

,

you assume all

risks associated with lithium batteries

.

• If

,

 at any time

,

 the battery begins to balloon or swell, discontinue use

immediately. If charging or discharging, discontinue and disconnect.
Continuing to use, charge or discharge a battery that is ballooning or
swelling can result in a fire.

• Always store the battery at room temperature in a dry area for best results

.

• Always transport or temporarily store the battery in a temperature range of

40-120º F

(

5-49º C

).

Do not store battery or aircraft in a car or direct sun

-

light

.

If stored in a hot car

,

the battery can

 catch fire

 

or 

be damaged.

• Always charge batteries away from flammable materials.
• Always inspect the battery before charging and never charge dead or dam

-

aged batteries

.

• Always disconnect the battery after charging

,

and let the charger cool

between charges

.

• Always

 

consistently monitor the temperature of the battery pack while

charging

.

• ONLY USE A CHARGER SPECIFICALLY DESIGNED TO CHARGE LI-PO

BATTERIES

.

Failure to charge the battery with a compatible charger

 

may cause fire

,

 

resulting in personal injury and/or property damage

.

• Never discharge Li-Po cells to below 3V under load

.

• Never cover warning labels with hook and loop strips

.

• Never leave charging batteries unattended

.

• Never charge batteries over recommended levels.
• Never attempt to dismantle or alter the charger

.

• Never allow minors under the age of 14 to charge battery packs

.

• Never charge batteries in extremely hot or cold places

(

recommended

temperature is 

40-120

°

F or 5-49

°

C

)

or place in direct sunlight

.

Charging Warnings

Meaning of Special Language:

The following terms are used throughout the product 

manual

 to indicate various levels of potential harm when operating this product

:

 

NOTICE: If procedures are not properly followed, the risk of physical property damage AND a possibility of serious injury are likely.

 

CAUTION: If procedures are not properly followed, the risk of physical property damage AND a possibility of serious injury are likely.

 

WARNING: If procedures are not properly followed, the risk of physical property damage AND a possibility of serious injury are likely.

WARNING

Read this instruction manual 

entirely

 to become thoroughly familiar with the features

 

of

 

the

 

product

 

before

 

Failure

 

to

 

operate

 

the product correctly can result in damage

 

to

 

the

 

produc

t or 

personal property and 

it can 

cause serious 

injury

.

 

  

operating

.

This is a sophisticated hobby product

.

It must be operated with caution and common sense and requires some basic mechanical ability

.

Failure to 

opera

-

te this 

p

roduct in a safe and responsible manner could result in injury or damage to the product or other

 

property

.

This product is not 

intended for use by

 

children without direct adult supervision

.

Do not use with incompatible components or alter this product in any way 

contrary to

 

the instructions provided by  

HSD HOBBY LTD. This manual contains instructions for safety

,

operation and maintenance

.

It is essential to read and 

follow all the instructions and warn

-

ings in the manual

 

prior to assembly

,

setup or use, in order to correctly operate

 the product

 and/or avoid 

damage or serious injury.

14+

Not for children under 14 years

.

This is not a toy

.

AGE RECOMMENDATON:

As the user of this product,you are solely responsible for operating it in a 

man-ner that does not endanger yourself and/or others or result in damage 

to the product and property of others.

 

 

Always keep a safe distance, in all directions, around your model to avoid 

collisions or injury.This model is controlled by a radio signal subject to 

interference from many sources outside of your control; interference can 

cause momentary loss of control.

• Always operate your model in open spaces away from full

-

size vehicles

,

traffic and people

.

• Always carefully follow the directions and

 

warnings for this and any optional

support equipment 

(

chargers

,

rechargeable battery packs

,

etc.).

• Always keep all chemical

,

small 

and electric 

parts out of the

reach of children

.

• A lways avoid water exposure to

 

all equipment 

that is 

not speciffically 

     

designed 

for this purpose

.

Moisture causes damage to electronics

.

• N ever place

 

any portion of the model in your mouth as it could cause

serious injury or death

.

• Never operate your model with low transmitter batteries

.

• Always keep aircraft in sight and under control

.

• Always use fully charged batteries

.

• Always keep 

the 

transmitter 

in the

 on

 state

 while aircraft is 

in use

.

• Always remove batteries before disassembly

.

• Always keep moving parts clean

.

• Always keep parts dry

.

• Always let 

the 

parts cool 

before touching 

after use

.

• Always remove batteries after use

.

• Always ensure failsafe is

 

properly set before flying 

.

• Never operate aircraft with damaged wiring

.

• Never touch moving parts

.

Safety Precautions and Warnings

NOTICE

All rights reserved by HSD for the upgrade and/or reconfiguration of products.

Thank you for purchasing from HSD. Please read this manual carefully before operating this plane. We hope this manual is useful 
in guiding you through the installation and adjustment of the plane so that you may 

successfully 

fly it.

Each product from HSD has unique functions that users will need to fully grasp step by step, as

 you will complete

 the assembly. It is 

necessary to assemble and test the product strictly in accordance with 

HSD's

 standards.

Содержание 105mm Super Viper
















Отзывы: