TITLE
:
DF40 Series Guideline
ETAD-H1015-00
HIROSE ELECTRIC CO.,LTD.
PRODUCT
:
BOARD TO BOARD/FPC CONNECTOR,
Pitch: 0.4mm, Width: 3.38mm,
Stacking height: 1.5-4.0mm
PAGE:
6
OF
18
Copyright© 2007 Hirose Electric Co., Ltd. All rights reserved.
1.1.5 Allocation of other components around the connector
Do not locate any other components which may affect on connector mating around the connectors.
1.1.6 FPC alignment marking for mating
Marking onto the opposite PWB from the FPC side for indicating the exact mating position is
recommended to support mating without misalignment during mating operation of FPC side to the
PWB side.
1.1.7 Precautions for PWB to PWB connection
In order to connect PWB to PWB, precision of necessary components and mounter or screw fitting is
required, and direct stress to the connector is avoidable. Avoid fixing PWBs with connecters only, and
stabilize them with other tools.
Keep connector warpage within 0.02 mm in connector longitudinal direction.
1.1.8 Selection of connector mounting machine and notice for mounting
Pay attention to the vacuum pick up area and position precision. For chucking pick and place, prior
confirmation is necessary to avoid connector deformation caused by excessive chucking force.
Confirmation prior to your manufacturing is necessary.
Not recommended
Recommended
Oct.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
