TITLE
:
DF40 Series Guideline
ETAD-H1015-00
HIROSE ELECTRIC CO.,LTD.
PRODUCT
:
BOARD TO BOARD/FPC CONNECTOR,
Pitch: 0.4mm, Width: 3.38mm,
Stacking height: 1.5-4.0mm
PAGE:
12
OF
18
Copyright© 2007 Hirose Electric Co., Ltd. All rights reserved.
2.4 Repairing (hand soldering)
Receptacle Plug
Raise of solder paste
Excessive solder paste or wire solder for repairing may cause raise of solder paste on the plug
contact lead. The raise of solder paste may affect on distance of PWBs or performance of spring
contact of the receptacle.
Repairing condition:
Soldering iron 350
C, 3 seconds MAX.
Notice:
Do not apply stress to the terminals.
Avoid touching housing with a soldering iron.
Repairing condition:
Soldering iron 350
C, 3 seconds MAX.
Notice:
Do not apply stress to the terminals.
Avoid touching housing with a soldering iron.
It may affect on mating that the
soldering paste height is 0.17 mm
of more from the upper surface of
the plug contact.
Oct.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
