HPRT PPTII-A, Руководство по программированию

Страница: 30 / 52

PPTII-A Programming Manual
www.hprt.com 30
m determine printing content
m printing content
1, 49
hexadecimal
（
dump
）
printing
2, 50 printer configuration infos printing
3, 51 reserve
4,52 start paper check out
5,53 reserve
[Notes] • This command is effective at the beginning of the line in standard mode.
• Receiving this command when defining macro, stop defining macro and execute this
command.
•After the test print is finished, the printer resets itself automatically. Therefore, the
already-defined data before this command is executed, such as an user-defined
characters, downloaded bit image, and macro, becomes undefined,and the receive
buffer and print buffer are cleared, and each setting returns to the default value.
GS * x y d1...d(x × y × 8)
[Name] Define download bit image
[Format] ASCII GS * x y d1...d(x × y × 8)
Hex 1D 2A x y d1...d(x × y × 8)
Decimal 29 42 x y d1...d(x × y × 8)
[Range]
1 ≤ x ≤ 255
，
1 ≤ y ≤ 48
，
0 ≤ d ≤ 255
，
x × y ≤ 1023
[Dscription] It defines a downloaded bit image using x and y.
• x dots in the horizontal direction of bit imge
• y dots in the vertical direction of bit image
[Notes] • x × 8 dots in the horizontal direction and y × 8 dots in the vertical direction.
• Once the value of x × y beside the defined range, the command is ineffective.
• d indicates the bit image data. Set a bit to 1 to print a dot, or set a bit to 0 to not print
a dot.
• The downloaded bit image will be cleared if the power is turned off.
• If the area of storing downloaded bit image in RAM has no room to store the current
downloaded bit image, the printer will clear the previously one to store the latest
downloaded bit image.
• The relationship between printing data and downloading bit image as follows: