HPRT MPT-III, Руководство пользователя

Страница: 1 / 2

-1-
-4- -3-
-2-
Mobile Thermal Printer
User Manual
Precautions
1) Be sure to use the specified battery and p ower source provided by our
company. Connection to an improper power source may caus e fire,
explosion or damage to the printer.
2) Don’t put the battery into fire or water, don’t disassemble or mod ify the
battery, don’t b e short cir cuit, otherwise may result in injury or fire or even
explosion.
3) If the printer would n ot be used for a long time, be s ure to t ake off the
battery, otherwise the batte ry may leak liquid which is corrosive, if
improper op eration c auses battery leak , and the liquid is spattered on
the skin o r clothes, please wash it with water, if spattered into the eyes, please
rinse them with water thorou ghly and see a doctor.
4) Please do not open the paper ca se cover when it is printi n g or just when
printing is over, d o not touch the print head with hand or body, overheat
may cause scald.
1) Water or other liquid should not sp ill into the pri nter, als o the printer should
not be expose to the rain , or e lse may ca use printer damage.
2) Please do not open the paper case cover when it is printing, otherwise the
printer may work improperly.
3) If print with seri al interface, should not unplug th e interface cable in the
course of pr inting, or else some prin ting data may be lost.
4) When print in Ir or IrDA m ode, b e sure the I r wind ow of the host
equipment face rightly t he Ir wind ow of the printer , t he distance should
be withi n the range of 50cm , an d the angle should be within the range of
30 .
5) When print with Blueto oth interface, the co mmunication distance
should be within 10 m eters, otherwise the prin ter doesn’t print or prints
rubbish codes.
6) Too high ( 40 ℃ ) or too low ( 0 ℃ ) temperature and too hig h ( 85%) or too low
(20%) relative humidity both effect the print quality.
7) The print paper in poor quality or st ored f or too long time also may
reduce the print quality even damage the printer.
8) In the black mark detecting mode, the printer requires that the
p reprinted bl ack mark is ac corda nt with the blac k mark specifications
(details please refer to 4 .2), otherwise the black mark can not be detected
correctly.
9) Be sure to use up the pow er of the battery bef ore ch arge it, as it can ensure
the using life of the battery.
3.Storage Precautions
1) The printer should be placed in such an environ ment that the
temperature is bet ween -20 ℃ and 7 0 ℃ , an d the rela tive humidity is
between 5% and 95%.
2) If the printer wil l be store d for a lo ng time, pleas b e sure to take out the
battery, otherwise may damage the battery and printer.
3) Normal therma l paper can’t b e kept too lo ng, if you need to keep the receipt
for a lon g p eri od, please choose lon g term effe c ti ve thermal paper.
4) The p rint paper should b e keep away from hig h temperature environment
and point-blank sunshine.
4.Battery Safety Precautions
Be sure to read the user manual carefully before using the product.
Igno re the following ins tr uctions may cause battery overheating, fire,
explosion, damage and/or performance, and reduced product life.
1) Do not allo w water, sea wa ter from e ntering or leakin g into the
battery. If the batter ies in ternal safety devic e burn, when charging it, it
may produce abnormal current and/or voltage, or abnorm al chemical
reaction when charging it, then may cause t he battery overheating, fire
and / or explosion.
2) Do not use or place t he batter y nea rby the stove or other high
temperature places. Excessive heat maybe damage the resin shell and/o r
the insulation mat erials , there by cause short-c ircuit inside the
battery, t hen the battery ma y be overheated, burning and/or
explosion.
3) When charging, use a specified charg er. Oth er conditions ( h igh
temp erature, high pressure/hig h c urrent, using the mo dified
battery charger,etc.) excluded here may r esult in overcharging the battery
and abnormal current and/or voltage, cause abnormal che mical rea ction ,
and m ay caus e the battery overheat, lightand/or explosion.
4) Battery clearly marks with positive and negative. When connect the
batte ry with the c harger and/or printer, b e sure to verify the correct battery
orientation. Reverse insertion will cause the reve rse charging and may cause
a bnorma l chemical r eactio n , and then may cause the batter y overheat, ignite, and
/ or explosion.
5) Do n ot make the battery contact w ith the power outlet and/ or car cigarette
lighter socket.This may cause high pressure and excessive current , a nd
le ad to the batte ry overheat, burning and/or explosion.
6) Do not heat the battery or put the battery into fir e. This may melt
insulation material and/or damage safety devices or safety equipm ent,
then ignite electrolytic solutio n , an d c ause the battery overheat,
burning and/or explosion.
7) Do not use the battery with contrary (+) and (-) location. In the ch arging
process , this will cause the reverse charging and m ay cause abnormal
chemical reaction. During use, may appear unpredictable current
exception, and cause the battery overheat, ignite, and/or explosion.
8) Do not make the battery (+) and (-) contact with any metal. Also, do not
carry along or store batteries with me tal objects, such as necklaces, hair
clips and so on. Battery internal short circuit may cause excessive curren t,
and lead to the batter y overheat, ignite, a nd/or explosion and the adjacent
metal objects (necklaces, hairpins, etc.) may be overheating.
9) Do not throw or attack the batt ery heavily. If internal safety devi ce of the
batteries burn, the battery charging may cause any abnormal current and/
or voltage, and abnorm al chemical reac tion, a nd lead to t he batter y
overhe at, ignite, and/or explosion.
1
2
3
6
5
7
8
9
4
Chapter 1 Brief Introduction
1.1 Appearance
1) Feed On/Off and Blue Status Indicator
2) RS232 Serial Interface
3) Infrared Ray(IR) Interface(optional)
4) Power Input
5) Power On/Off and Red Power Indicator
1.2 Accessories
Li-ion Battery
Standard accessories
Optional accessories
Leather Case
Precautions············································································································ 1
1. Safety Precautions········································································································1
2. Operation Precautions·································································································1
3. Storage Precautions······································································································ 2
4. Battery Safety Precautions ··························································································2
Chapter 1 Brief Introduction ································································· ························4
1.1 Appearance ·······································································································4
1.2 Accessories ··········································································································4
Chapter 2 Specifications ····························································································5
Chapter 3 Operation Methods·····················································································6
3.1 Preparation Before Using ··············································································6
3.1.1 Li-ion Battery Loading ···············································································6
3.1.2 Paper Loading ······················································································· 6
3.2 Basic Function··································································································· 6
3.2.1 Printer On ······························································································ 6
3.2.2 Printer Off ·························································································· 7
3.2.3 Self-test ································································································· 7
3.2.4 Paper Loading ···················································································· 7
3.2.5 Battery Charging ················································································ 7
3.3 Interface and Printing ······················································································ 8
3.3.1 Serial Interface ···················································································8
3.3.2 Infrared Ray(IR)&IrDA Interface ························································8
3.4 LED Indicator and Buzzer Definition ······························································· 9
3.5 Software Tools of MPT-III ··············································································· 9
Chapter 4 Other Information ·························································································10
4.1 Printer Technical Manual ···············································································10
4.2 Preprinted Black Mark Specification······························································10
Contents
1.Safety Precautions
2.Operation Precautions
Power Adapter
Varies by local or region
Paper Roll
Serial Interface Cable
6) Top Cover
7) Cover Open Button
8) Li-i on Battery Cover
9) Buckle
MPT- III
Xiamen Hanin Electronic Technology Co.,Ltd.
Room 305A, Angye Building, Pioneering Park,
Torch High-tech Zone, Xiamen, China 361009
+86—(0)592-5885993
+86—(0)592-5885992
www.hprt.com
ADD:
TEL:
FAX:
WEB:
CD
User Manual
User Manual