Instruction Manual
Inline Exhaust Fan Kit – 100mm & 150mm
Cat. No. EFIL100SQWE, EFIL150SQWE
Read through these instructions completely before commencing installation. Retain for future use.
Cat No.
EFIL100SQWE
EFIL150SQWE
Supply voltage
230-240V a.c. 50Hz
Power rating
30W
60W
Protection class
Class II
IP rating
IP44
Draught stopper
Yes (PET Sheet)
Duct diameter
Ø100mm
Ø150mm
Engine size
290 x 200 x 210mm
290 x 230 x 250mm
Engine weight
1.9kg
3.0kg
Power cord length
1m
Ceiling cut-out size (for inlet & outlet grilles)
Ø110mm
Ø160mm
Max airflow (m
3
/hr)
Duct length
Low Speed (I)
High Speed (II)
Low Speed (I)
High Speed (II)
No duct
200
255
450
555
1m per side (total 2m)
100
125
310
390
2.5m per side (total 5m)
90
115
270
335
Specifications
Features
Please Read Carefully
1
2
3
The inline fan is designed to extract steam and odours from a bathroom and expel it to the exterior through an eave outlet. It is also suitable for
extracting air from one room and expelling it to another room (heat distribution).
The fan engine is fitted into the ceiling, well away from the inlet. This inline feature allows the inlet grille to be mounted in wet areas (near the splash
zones of bathrooms) or even above the shower. And because the motor is in the ceiling cavity (away from the inlet grille), noise from the fan is minimal.
1. This product shall be installed in accordance to AS/NZS 3000 Wiring Rules.
2. This product is meant for indoor use only.
3. Regulations concerning the discharge of air must be fulfilled. Local building codes may require venting to the outside.
4. Do not locate the inlet grille above a stove. This product is not to be used in conjunction with a kitchen range hood exhaust system.
5. The minimum length of duct between the fan engine and the inlet / outlet grilles is 200mm.
6. Cross Ventilation:
Ventilation products must have an adequate source of external air to ensure rated performance.
