The support specialist verifies the information and then sends a message to the authorized email address on file. This
message contains the authorization code. An ISO image, which is also the authorization code, is attached to the
message.
4. Type the authorization code into the response field.
5. Determine a single-use administrator password.
6. When prompted, enter and re-enter the new password.
7. Select OK to set the single-use password.
8. Verify by logging out and then log in to this account with the new password.
Shut down the appliance using the appliance maintenance console
This procedure describes how to use the appliance maintenance console to perform a graceful shutdown of the appliance.
This action shuts down only the local appliance of an appliance cluster.
Prerequisites
Ensure that all users are logged out and all ongoing work is completed.
Procedure
1. Access the appliance maintenance console main menu.
2. Select Shut down in the main menu.
3. Confirm that you want to shut down the appliance.
4. Verify by observing the shutdown.
Restart the appliance using the appliance maintenance console
This procedure describes how to use the appliance maintenance console to shut down and then restart the appliance.
This action affects only the local appliance of an appliance cluster.
If the local appliance is the active appliance of an appliance cluster, restarting it (the local appliance) stops the services
that were running on it. Until the peer appliance restarts those services, high availability is temporarily suspended.
Prerequisites
Ensure that all users are logged out and all ongoing work is completed.
Procedure
1. Access the appliance maintenance console main menu.
2. Select Restart.
3. Confirm that you want to restart the appliance.
4. Verify by observing the restart.
Image Streamer Maintenance Console
70