User roles for Image Streamer
The following user roles exist for configuring and accessing Image Streamer using HPE OneView:
Infrastructure administrator
Infrastructure administrator has complete administrative privileges to configure HPE OneView and Image Streamer.
Some of the actions that an Infrastructure administrator performs are:
• Image Streamer setup
• Firmware update
• Addition, replacement, and removal of appliances
Server administrator
Server administrator performs server provisioning and OS deployment from the server profile in HPE OneView.
Software administrator
Software administrator can perform the following actions:
• Create and manage artifacts such as Plan Scripts, OS Build Plans, Golden Images, and Deployment Plans.
• Manage and load artifact bundles.
• Capture Golden Images from OS volumes.
• Set default configuration settings that Server administrators might need for deployment.
• Determine the configuration settings that Software administrators may customize.
Backup administrator
Backup administrator can perform the following actions:
• Create and download backup files, view the appliance settings and activities.
• Has the authority to use scripts to log in to the appliance and run scripts to back up the appliance.
For information on other user roles in HPE OneView, see
HPE OneView Help for HPE Synergy available at the Hewlett
Packard Enterprise Information Library.
Deployment using Image Streamer
Deployment is installing and configuring an operating system for servers. To deploy an operating system on HPE Synergy
servers, Image Streamer uses four artifacts. These four artifacts are the building blocks of Image Streamer.
NOTE: Compute modules and servers are used synonymously while referring to the HPE Synergy servers.
The artifacts include Plan Script, OS Build Plan, Golden Image, and Deployment Plan. The illustration shows the building
blocks of Image Streamer with a single Deployment Plan scenario.
Introduction to Image Streamer
11