HPE Synergy 12000 Frame Скачать руководство пользователя страница 97

Страница: 97 / 141

NVDIMM Function LED patterns

For the purpose of this table, the NVDIMM-N LED operates as follows:

Solid indicates that the LED remains in the on state.

Flashing indicates that the LED is on for 2 seconds and off for 1 second.

Fast-flashing indicates that the LED is on for 300 ms and off for 300 ms.

State

Definition

NVDIMM-N Function LED

The restore operation is in progress.

Flashing

The restore operation is successful.

Solid or On

Erase is in progress.

Flashing

The erase operation is successful.

Solid or On

The NVDIMM-N is armed, and the NVDIMM-N is in normal operation.

Solid or On

The save operation is in progress.

Flashing

The NVDIMM-N finished saving and battery is still turned on (12 V still
powered).

Solid or On

The NVDIMM-N has an internal error or a firmware update is in
progress. For more information about an NVDIMM-N internal error, see
the IML.

Fast-flashing

NVDIMM Function LED patterns

Содержание Synergy 12000 Frame














































































































































Результаты поиска

Содержание Synergy 12000 Frame

Отзывы:

Похожие инструкции для Synergy 12000 Frame

Бренды по названию

Популярные бренды

HPE Synergy 12000 Frame, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Synergy 12000 Frame

Отзывы:

Похожие инструкции для Synergy 12000 Frame

Бренды по названию

Популярные бренды