HPE Synergy 12000 Frame, Руководство по техническому обслуживанию и ремонту

Страница: 126 / 141

HPE Synergy Cabling HPE Synergy Cabling
Depending on your HPE Synergy configuration, HPE Synergy requires various types of cabling. To assist with planning and cabling HPE
Synergy, the HPE Synergy Cabling Guide provides cabling scenarios and diagrams.
Management network cabling
Cabling the management network includes cabling the frame link module LINK ports together to form a management ring (frame link
topology) and cabling two frame link module MGMT ports to the management network.
HPE Synergy Image Streamer cabling
Cabling for HPE Synergy Image Streamer OS deployment includes management cabling, HPE Synergy Image Streamer cabling, and
interconnect cabling. HPE Synergy 12000 frames with HPE Synergy Image Streamer installed use each MGMT port in the frame for
OS deployment. When HPE Synergy Image Streamer is installed in a frame, the MGMT ports are automatically dedicated to OS
deployment and cannot be used for management network connectivity.
Interconnect module cabling
HPE Synergy supports a composable fabric that spans multiple frames and includes master interconnect modules (switches) and
satellite modules (links).
Power cabling
HPE Synergy power cabling includes cabling multiple frames for power feed redundant power, cabling power supplies for power feed
redundancy, and power cabling for both a single frame and multiple frame configurations.
HPE Synergy Console cabling
Direct connections to the HPE Synergy Console are possible by connecting a laptop directly to a frame through the front panel or by
connecting KVM to the frame link module.
For more information, see the HPE Synergy Cabling Guide at the Hewlett Packard Enterprise website
(http://www.hpe.com/info/synergy-cabling-guide
http://www.hpe.com/info/synergy-cabling-guide).
HPE Synergy Cabling 126