HPE Synergy 12000 Frame, Руководство по техническому обслуживанию и ремонту

Страница: 119 / 141

HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy LEDs and buttons HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy LEDs and buttons
Item Item Description Description Status Status
1 Interconnect link port LEDs Solid green = Linked
Solid red = Error detected .
Off = No link
2 QSFP+ port LEDs The four LEDs above each port correspond to the 10GbE or 8Gb FC
channels of the port. The LEDs display one of four modes:
Ethernet mode:
Solid green = The port is configured as an Ethernet port.
Off = The port is not configured as an Ethernet port.
PID mode:
Solid green = The port is configured as an uplink port.
Solid amber = The port is configured as a stacking port.
Solid purple = The port is configured as a mirrored port.
Solid red = Error.
Solid blue = Activated by OneView for port identification.
Off = The port is not configured.
Link/Activity mode:
Solid green = 10Gb Ethernet link
Flashing green = 10Gb Ethernet activity
Solid amber = 8Gb FC link
Flashing amber = 8Gb FC activity
Solid purple = 40Gb Ethernet link
Flashing purple = 40Gb Ethernet activity
Solid Red = Error
Off = No link
Fibre Channel (FC) mode:
Solid green = The port is configured as an FC port.
Off = The port is not configured as an FC port.
To switch between the LED modes, press the NEXT button.
3 NEXT button Selects the QSFP+ port LED mode.
4 Reset pin-hole Resets the module
1
HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy LEDs and buttons 119